HP Color LaserJet 9500 Printer series User Manual
Page 230
228 Chapter 9 – Specifications and regulatory information
Rev. 1.0
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 73/
23/EEC, and carries the CE-Marking accordingly
1
The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
3
The product include LAN (local area network) options. When the interface cable is attached to LAN connector, the
product meets the requirements of CISPR22 / EN55022 Class A in which case the following applies:
"Warning - This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures."
Boise, Idaho USA
28 June, 2002
For Regulatory Topics Only:
Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria 3130, Australia.
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard Gmbh,
Department HQ-TRE / Standards Europe, Herrenberger Straße 130, D-71034 Böblingen (FAX: +49-7031-14-3143)
USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, Idaho 83707-0015
(Phone: 208-396-6000)