HP Color LaserJet 9500 Printer series - Manual (Page 60)

http://www.hp.com/support/lj9500
58 Chapter 4 – Improving print quality Rev. 1.0
7 The message X DIMENSION = appears, with 11.7 inches (or 297 millimeters) selected by default. Use the numeric
keypad to type the X dimension measurement of your media, and then press .
Note The X dimension is the length of the page side that is perpendicular to the direction that the page feeds into
the printer. For tray 2 and tray 3, the X dimension measurement must be between 5.8 and 11.7 inches (or
148 and 297 millimeters). For tray 4, the X dimension must be between 7.2 and 11.7 inches (182 and 297
millimeters).You can find the X dimension measurement of your media on the paper guides inside the tray.
8 The message Y DIMENSION = appears, with 17 inches (or 432 millimeters) selected by default. Use the numeric
keypad to type the Y dimension measurement of your media, and then press .
Note The Y dimension is the length of the page that is parallel to the direction that the page feeds into the printer.
The Y dimension measurement must be between 8.27 and 17 inches (or 210 and 432 millimeters). You can
find the Y dimension measurement of your media on the paper guides inside the tray.
9 The message TRAY X [X DIMENSION] X [Y DIMENSION] [INCHES OR MILLIMETERS] SIZE SPECIFIED BY USER
appears. This message alternates with the message PRESS TO CHANGE TYPE . The media type is set to Plain by
default. If you want to change this setting, use or to scroll to the media type you want, and then press .
10 Press P AUSE /R ESUME to close the menus.