HP Color LaserJet 9500 Printer series User Manual
Page 162
160 Chapter 6 – Solving problems
Rev. 1.0
49.XXXXX
PRINTER ERROR
A firmware error has occurred.
The value of
XXXXX
is a component-level
error code ranging from 0501 through
0519.
Turn the printer off, and then on.
If this message persists, contact an
HP-authorized service or support
provider. (See “Customer support
options worldwide” on page 214, or go
to
.)
50.X FUSER ERROR
A fuser error has occurred.
Turn the printer off and then back on
again. Check to see if the message
goes away.
If you have a 220-V printer and this
message appears when you turn the
printer on, make sure that the printer is
not plugged into a 110-V outlet.
If this message persists, contact an
HP-authorized service or support
provider. (See “Customer support
options worldwide” on page 214, or
Message
Description or explanation
Recommended action