HP Color LaserJet 9500 Printer series User Manual
Page 203
Advertising
ENWW
Installing supplies 201
7
10
Close the left door. Reattach any output device that you removed.
Note
If the door does not close, make sure that the blue fuser levers are in the
vertical position.
11
If
NEW FUSER KIT
appears on the control panel display, use
and
to
scroll to
YES
, and then press
. The kit life-count is automatically reset.
12
If
NEW FUSER KIT
does not appear, press
to open the menus. Use
and
to
select
CONFIGURE DEVICE
, then to select
RESETS
, and then to
select
RESET SUPPLIES
. Scroll to
NEW FUSER KIT
, and then select
YES
to
reset the count.
10
11
12
Advertising