To change the fuser levers – HP LaserJet 9050 Printer series User Manual
Page 60
Advertising
58 Chapter 2 Printing tasks
ENWW
3
Adjust the guides to touch the envelope stack without bending the envelopes. Make sure the
envelopes fit under the tabs on the guides.
4
Change the fuser levers (see
To change the fuser levers
1
If an optional output device is installed, slide it away from the printer to access the left door.
2
Open the left door.
WARNING!
Avoid touching the adjacent fusing area. It can be hot.
Advertising
This manual is related to the following products: