HP Insight Management-Software - Manual (Page 29)

Table 9 Parameter descriptions for -set enet-connection (continued)
Optional Required Description Parameter
x The requested operational
speed for the server port. -speedtype
Valid values include auto,
preferred
and custom.
Default value is preferred
The following list describes
the speed type:
• Auto—Allocates
maximum port speed
constrained by the
maximum configured
speed for the network
• Preferred—Speed of the
network matches the
preferred speed of the
network to which the
connection is associated.
NOTE: If no preferred
speed is configured, the
network speed defaults to
auto
.
•
Custom—Configures any
speed from 100Mb to the
maximum configured
speed for the network in
100Mb increments.
x
IMPORTANT: The -speed
parameter is required only
if the speed type is set to
custom
.
The user-defined speed for
the server port. Valid values
include 100Mb to the
maximum configured speed
for the network in 100Mb
increments. The value needs -speed
to be an integer from 100
to the maximum speed.
Output
The function returns the result of the set operation or a jobid if –nb is specified.
Examples
•
Change the associated network of an Ethernet connection:
vcemcli -set enet-connection –profilename MyProfile2 -portnumber 1
–network NewNetworkName
•
Set an Ethernet network connection to unassigned:
vcemcli -set enet-connection –profilename -RedProfile1 -portnumber
1 –network ""
•
Disable PXE on an Ethernet network connection:
vcemcli -set enet-connection –profilename GreenProfile3 -portnumber
1 –pxe disabled
set enet-connection 29