HP Insight Management-Software User Manual

Page 49

Advertising
background image

Table 20 Parameter descriptions for -set iscsi-boot-param (continued)

Optional

Required

Description

Parameter

x

NOTE:

The

-targetport2

parameter

is required if the
-targetip2

parameter is

specified.

The TCP port associated with
the alternate target IP
address. The default value is
3260.

-targetport2

x

The initiator and target must
agree on an authentication

-authentication

method or the iSCSI initiator
cannot log on to the target.
Supported Authentication
values include none, chap
and chapm. The default
selection for this attribute is
none

.

x

NOTE:

The -username

parameter is required if the
authentication type is chap
or chapm.

User name for
authentication. The
username length is a
maximum of 223 characters.
If the name string contains
non-alphanumeric

-username

characters, it should be
enclosed in quotes.

x

NOTE:

The -secret

parameter is required if the
authentication type is chap
or chapm.

Secret password for chap
and authentication. It is
specified as a string or a
long hex value (starting with
'0x'). This value must be at
least 96 bits (12 bytes, 24

-secret

hex digits) and at most 16
bytes, 32

x

NOTE:

The

-mutualusername
parameter is required if the
authentication type is
chapm

.

User name for
authentication. The
username length is a
maximum of 223 characters.
If the name string contains
non-alphanumeric
characters, it should be
enclosed in quotes.

-mutualusername

x

NOTE:

The

-mutualsecret

parameter

is required if the
authentication type is
chapm

.

Password for authentication.
It should be specified as a
string or a long hexadecimal
value (starting with 0x). This
value must be at least 96
bits (12 bytes, 24
hexadecimal digits) and at

-mutualsecret

most 16 bytes, 32
hexadecimal digits long.

x

Allows the iSCSI option
ROM to retrieve the iSCSI

-iscsibootparamdhcp

boot parameters from DHCP
or through static
configuration. Valid values
are enabled and
disabled

. The default

selection for this attribute is
disabled

allowing for

static configuration.

set iscsi-boot-param

49

Advertising
This manual is related to the following products: