HP Insight Management-Software - Manual (Page 52)

add server-port-map
The -add server-port-map command adds new server port network mapping, and allows
server ports to be shared among multiple VC Ethernet networks.
Syntax
-add server-port-map –profileName <profileName>
-portnumber <portNumber>
-network <NetworkName>
[-uplinkset <Uplink Set Name>]
[-vlanid <VLan Id>]
[-untagged <true|false>]
Parameters
Table 22 Parameter descriptions for -add server-port-map
Optional Required Description Parameter
x The name of an existing
profile to add the
server-port-map to. -profilename
x The name of the port to add
the server-port-map to. -portnumber
x The name of a valid network
to which the mapping will
be added. -network
x
NOTE: If the domain
setting
sharedservervlanid
is
set to true, then the
Uplinkset
is a required
value.
The name of the shared
uplinkset. -uplinkset
x
NOTE: If the uplinkset
name is specified, then the
vLanid
property should not
be specified, since the server
VLAN ID will be forced to be
same as the VLAN ID used
when adding the network to
the shared uplinkset.
-vlanid
x Enables or Disables the
network to handle untagged -untagged
packets. Only one network
in an enet-connection can be
made to handle untagged
packets. The default value is
false
.
NOTE: If a shared uplink
set is being used, then the
untagged network is the
same as native network, if
present. However, any other
network can be configured
to handle untagged packets.
52 Using VCEM commands