HP Insight Management-Software - Manual (Page 54)

set server-port-map
The -set server-port-map command modifies the properties of a server port network mapping.
Syntax
-set server-port-map –profilename <profilename>
-portnumber <PortNumber>
-network <Network Name>
[-vlanid <VLan Id>]
[–untagged <true|false>]
Parameters
Table 23 Parameter descriptions for -set server-port-map
Optional Required Description Parameter
x The name of an existing
profile to associate with the -profilename
server-port-map to be
modified.
x The number of the port to
modify the server-port-map
for. -portnumber
x The name of a valid Ethernet
network to associate with the
mapping. -network
x The new VLAN ID used for
mapping the server port to -Vlanid
the network. Valid VLAN ID
values are 1-4094.
x Enables or Disables the
network in order to handle -untagged
untagged packets. Only one
network in an
enet-connection can be
made to handle untagged
packets.
NOTE: If a Shared
Uplinkset is being used, then
an untagged network will be
the same as the native
network if present. However,
any network can also be
configured to handle
untagged packets.
NOTE: When changing a
network untagged option
from true to false you
must provide a VLAN ID if
the global option
sharedservervlanid
is
set to false.
Output
The function returns the result of the set operation or a jobid if –nb is specified.
54 Using VCEM commands