HP XP Business Copy Software User Manual
Page 102
Table 39 Error Code and Error Contents When Operating RAID Manager (continued)
Error Contents
Error Code (SSB2)
Error Code (SSB1)
Because the volume specified as the S-VOL was the P-VOL or the S-VOL
of FlashCopy Mirroring V2, the quick restore operation or the reverse
copy operation was rejected.
22f9
b9a0/b9a1/b9a2/
b9a5/b9a6/b9ae/
b9af
The pair operation was rejected because of one of the following
reasons:
•
Shared memory is not allocated.
•
XP Business Copy is not installed.
2301
Because the volume specified as the P-VOL or the volume specified as
the S-VOL was not the top volume of the LUSE volume, the pair
operation was rejected.
2302
Because the LBA size of the specified P-VOL was not the same as the
size of the specified S-VOL, the pair operation was rejected.
2306
Because the number of pairs exceeded the maximum number of pairs,
the pair creation was rejected.
2309
Because the volume specified as the S-VOL was the P-VOL of the XP
Business Copy pair whose MU number is 0, the pair creation was
rejected.
230A
Because the pair was being suspended or deleted, the pair operation
was rejected.
230B
The pair operation was rejected due to one of the following causes:
1.
Because the specified consistency group number had already been
used for the L1 pair, the pair creation was rejected.
2.
Because the specified consistency group number had already been
used for the L2 pair, the pair creation was rejected.
3.
Because the volume specified as the P-VOL was the S-VOL of the
pair that was being split by quick split, the pair creation was
rejected.
4.
Because the VLL setting of the P-VOL was different from that of the
S-VOL, the quick restore operation was rejected.
5.
Because the specified P-VOL and S-VOL were the FlashCopy
Mirroring pair, the pair operation was rejected.
6.
Because the pair status of the specified P-VOL and S-VOL was PSUE,
the quick restore operation or the reverse copy operation was
rejected.
7.
Because the specified P-VOL and the S-VOL was the L2 pair, the
quick restore operation or the reverse copy operation was rejected.
8.
The At-Time Split operation on a consistency group was rejected
because some of the pairs in the consistency group were being
resynchronized, being split, or already suspended.
9.
Because the pair status of the P-VOL, the S-VOL, or both showed
that the pair could not receive the issued command, the pair
operation was rejected.
2310
Because the volume specified as the S-VOL was online to the host, the
pair operation was rejected.
2312
Because the volume specified as the S-VOL was the S-VOL of another
XP Business Copy pair whose pair status was PSUS, the pair creation
was rejected.
2314
102 Troubleshooting