HP XP Business Copy Software - Manual (Page 18)

be the P-VOL) are resynchronized when update copy operations are performed for pairs in
the PAIR status.
The pair status during a quick restore operation is COPY(RS-R) until the volume map change
is complete. The P-VOL and S-VOL become inaccessible to all hosts for write operations during
a quick restore operation.
◦ After quick restore operation is executed, the Remote Web Console window may display
old configuration information on components such as logical volumes (LDEVs). The window
may display configurations before the quick restore operation is performed. To update
configuration information on Remote Web Console, wait until the quick restore operation
completes and then click File and then Refresh on the menu bar of the window.
◦ If the differential data between P-VOL and S-VOL is small, the reverse copy operation
may be completed faster than the quick restore operation.
◦ If you create a pair by using an encrypted volume and a non-encrypted volume and then
execute Quick Restore, the P-VOL encryption status and the S-VOL encryption status will
be reversed. For example, if you perform Quick Restore on an encrypted P-VOL and a
non-encrypted S-VOL, P-VOL will be a non-encrypted volume, and S-VOL will be an
encrypted volume.
Figure 7 (page 19) illustrates how the data changes during the reverse pairresync operations.
18 About XP Business Copy Operations