HP XP Business Copy Software - Manual (Page 70)

•
The Select S-VOL box allows you to filter the S-VOLs displayed in the S-VOL List located on
the right.
◦ The Port list allows you to select the available S-VOLs by port.
◦ The Volume Type box:
The Internal VOL check box allows you to select the available S-VOLs that are internal
volumes.
The External VOL check box allows you to select the available S-VOLs that are external
volumes.
You need the XP External Storage features to select the external volumes.
◦ The Attribute box allows you to select the available S-VOLs that are reserved when the
Reserved check box is selected, or those that are unreserved when the Not Reserved
check box is selected. The Attribute box also allows you to select the pairs that can be
set as L2 pairs when the Pair check box is selected.
The number of secondary volumes that can be displayed in the S-VOL List at a time is
limited to 1,024 volumes. In case the number of volumes defined in the storage system
exceeds this limit, use the Previous and Next buttons on the upper right of the S-VOL List
to turn the pages of the S-VOL List and see the entire list.
•
The Previous button allows you to return to the previous page of the S-VOL List. This button is
selectable only when the number of volumes defined in the storage system exceeds 1,024
volumes, which is the maximum number of volumes that can be displayed on one page. The
button is grayed out if the total number of volumes defined in the storage system is less than
1,024 volumes.
•
The Next button allows you to turn to the next page of the S-VOL List. This button is selectable
only when the number of volumes defined in the storage system exceeds 1,024 volumes,
which is the maximum number of volumes that can be displayed on one page. The button is
grayed out if the total number of volumes defined in the storage system is less than 1,024
volumes.
•
The S-VOL List displays the following information related to S-VOLs:
Volume: Information about the volume displays in AAA-BB-CCC(XX:YY:ZZ) format. ◦
– AAA: Port ID (cluster and channel number)
– BB: Group number of host group
– CCC: LU number
– XX:YY:ZZ: LDKC number:CU number:LDEV number
An LDEV number that ends with a pound or gate symbol (#) indicates that the LDEV is an
external volume (for example, 00:00:01#). An LDEV number that ends with a letter X
indicates that the LDEV is a virtual volume used by XP Thin Provisioning (for example,
00:00:01X). For details regarding the external volumes, see the HP StorageWorks
XP24000/XP20000 External Storage Software User Guide. For information about XP
Thin Provisioning, see the HP StorageWorks XP24000/XP20000 Thin Provisioning
Software User Guide.
◦ Pair: The number of pairs.
◦ Emulation: The emulation type of the S-VOL.
◦ Capacity(MB): The capacity of the S-VOL displayed in megabytes (MB).
◦ CLPR: The cache logical partition (CLPR) of the S-VOL.
•
The Set button adds the selected S-VOL and P-VOL to the Paircreate Volume List as an L1 pair.
70 Performing XP Business Copy Operations