HP XP Business Copy Software - Manual (Page 92)

Storage Software User Guide. For information about XP Thin Provisioning, see the HP
StorageWorks XP24000/XP20000 Thin Provisioning Software User Guide.
•
S-VOL: The LUN information for the S-VOL displays in XX:YY:ZZ (LDKC number:CU number:LDEV
number) format.
•
MU: MU number.
•
Status: The status of the L1 pair displays. For detailed information about pair statuses, see “XP
Business Copy Pair Status” (page 22) .
•
Sync.: The rate of synchronization of the P-VOL and the S-VOL.
•
CTG: The consistency group number displays if the L1 pair is registered to the group. If the
pair is not registered to the consistency group, --- displays.
•
CLPR(P): Information about the cache logical partition (CLPR) of the P-VOL displays in AA:BB
(CLPR number:CLPR name) format.
•
CLPR(S): Information about the cache logical partition (CLPR) of the S-VOL displays in AA:BB
(CLPR number:CLPR name) format.
•
Refresh the window after this dialog box is closed. check box: If you select the check box, the
information displayed in the Pair Operation window is updated after the Detail dialog box
closes. If you do not select the check box, the information in the Pair Operation window is
the same before and after you close the Detail dialog box.
•
The Refresh button updates the information on the Detail dialog box.
•
The Close button closes the Detail dialog box.
Viewing S-VOL Path Information
The S-VOL Path dialog box displays information on the selected pair (all paths defined for the
S-VOL).
To open the S-VOL Path dialog box:
1. Select one or more pair in the Volume List on the Pair Operation window.
2. Right-click the selected volumes or pairs to display the menu commands.
3. Select the S-VOL Path command from the menu.
The S-VOL Path dialog box displays.
You cannot select the S-VOL Path command when you have selected SMPL volumes.
92 Performing XP Business Copy Operations