Setting options – HP XP Business Copy Software User Manual
Page 67
•
Capacity (MB): The storage capacity of the volume displayed in megabytes (MB).
•
CLPR: The cache logical partition of the volume displays.
•
The OK button resets the reserve attribute of the XP Business Copy S-VOLs and sets the status
of the volumes back to SMPL.
The settings display in the Preview List on the Pair Operation window. To apply the settings
to the storage system, you must click Apply on the Pair Operation window.
•
The Cancel button closes the Set Reserve Attribute dialog box without resetting the reserve
attribute.
To unreserve one or more volumes (by resetting the reserve attribute):
1.
Make sure that the volumes you want to unreserve are no longer assigned to XP Business Copy
pairs as S-VOLs.
If the reserved volume is assigned to an XP Business Copy pair, you need to delete the pair
before you unreserve the volume. See
for instructions on deleting
XP Business Copy pairs.
2.
Go to the Pair Operation window, and select the desired port or host group in the Tree.
3.
Select and right-click the desired SMPL volumes.
The menu is displayed.
You can display only the SMPL volumes in the Volume List by using the Display Filter dialog
box.
4.
Select the Change Reserve command in the menu.
The Reset Reserve Attribute dialog box opens.
Select only reserved and unpaired volumes to use the Change Reserve command.
5.
On the Reset Reserve Attribute dialog box, ensure that the right volumes are displayed and
then click OK.
The setting will be reflected in the Preview List on the Pair Operation window.
6.
Click Apply on the Pair Operation window.
The settings are reflected in the storage system.
You can check whether the attribute setting is updated or not on the Display Filter dialog box.
Setting Options
The Option window (see
) allows you to specify the options to expand
XP Business Copy operations.
To set options:
1.
Display the Option window.
If you are already displaying the other window shown by a tab, click the Option tab. For
information about how to display the Option window directly by starting up Remote Web
Console, see
“Starting XP Business Copy” (page 52)
2.
Select the check box of the option you want to set.
•
For detailed information about options, see
“XP Business Copy Options” (page 23)
.
•
If you do not want to set any option, clear all check boxes in the Select Option(s) box.
3.
Click Apply.
You can now perform an XP Business Copy operation with the specified option.
Setting Options
67