HP XP Business Copy Software User Manual
Page 17
Figure 6 Forward Pairresync Operations
CAUTION:
If the copy operation is completed without any host I/O, the data in the P-VOL and
the data in the S-VOL may not be the same. Whether the P-VOL and the S-VOL have the same data
depends on the condition of the storage system. To make the P-VOL data and the S-VOL data equal,
split the pair and make the pair status PSUS.
•
Reverse Copy (reverse pairresync in normal speed)
The reverse pairresync operation (see
) synchronizes the P-VOL with the
S-VOL. The copy direction for a reverse pairresync operation is S-VOL to P-VOL. The pair status
during a reverse copy operation is COPY(RS-R). The P-VOL and the S-VOL become inaccessible
to all hosts for write operations during a reverse pairresync operation. As soon as the reverse
pairresync is complete, the P-VOL becomes accessible.
The P-VOL remains read-enabled during the reverse pairresync operation only to enable the
volume to be recognized by the host. The data on the P-VOL is not guaranteed until the reverse
pairresync operation is complete and the status changes to PAIR.
•
Quick Restore (reverse pairresync in fast speed)
The quick restore operation (see
) speeds up reverse copy by changing
the volume map in the storage system to swap the contents of the P-VOL and S-VOL without
copying the S-VOL data to the P-VOL. The P-VOL (used to be the S-VOL) and S-VOL (used to
XP Business Copy Operations
17