HP LaserJet 3200 All-in-One Printer series - Manual (Page 124)

122
Chapter 6 - Copying EN
To make black and white copies
1
Load the document into the document feeder tray.
2
Adjust any options, such as contrast or copy size.
3
If you are making only one copy, press C OPY .
- Or -
If you are making multiple copies, enter the number of copies you
want and press
C OPY .
Making color copies
You can create color copies by using the product to scan the original,
and then using a color printer to print multiple copies. The HP
LaserJet 3200 does not print in color. See the software help for more
information about how to make color copies.
Using the Contrast button to adjust the
contrast for the current fax or copy job
The contrast setting affects the lightness or darkness of an outgoing
fax as it is being sent or the resulting copy. Using the following
procedure changes the contrast for the current job only. After the fax
has been sent or the copy is made, the contrast setting returns to the
default.
Note
To change the default copy contrast, see “Changing the default copy
contrast” on page 126.
To adjust the contrast
1
Press C ONTRAST to display the current contrast setting.
2
Use the < or > key to move the slider to the left to make the fax or
copy lighter than the original, or move the slider to the right to
make the fax or copy darker than the original.
3
Press E NTER /M ENU to save the selection.