HP LaserJet 3200 All-in-One Printer series - Manual (Page 208)

206
Chapter 8 - Problem Solving and Product Maintenance EN
Selecting an alternate PPD
You can select an alternate PostScript Printer Description (PPD).
PPDs, in combination with the printer driver, access the printer
features and allow the computer to communicate with the product.
To select an alternate PPD
1
Open the Chooser from the Apple menu.
2
Click the HP LaserJet Print icon.
3
If you are on a network with multiple zones, select the zone in the
AppleTalk Zones box where the printer is located.
4
Click the printer name you want to use in the Select a PostScript
Printer box. (Double-clicking will immediately generate the next
few steps.)
5
Click Setup. (This button may read Create for first-time setup.)
The HP LaserJet
3200 product
does not appear
in the All-in-one
setup utility.
Software troubleshooting
Check that your Macintosh supports
USB.
Verify if your Macintosh has Mac OS
8.6 or later.
Hardware troubleshooting
Check that the printer is turned on.
Verify that the USB cable is properly
connected.
Check that you are using the
appropriate high-speed USB cable.
Ensure that there are not too many
USB devices drawing power from the
chain. Disconnect all devices from
the chain and connect the cable
directly to the USB port on the host
computer.
Check to see if there are more than
two non-powered USB hubs in a row
on the chain. Disconnect all devices
from the chain and connect the cable
directly to the USB port on the host
computer.
Note
: The iMac keyboard is a
non-powered USB hub.
Problem Cause Solution