HP LaserJet 3200 All-in-One Printer series - Manual (Page 63)

EN Sending faxes
61
Using the Contrast button to adjust the
contrast for the current fax or copy job
The contrast setting affects the lightness or darkness of an outgoing
fax as it is being sent or the resulting copy. Using the following
procedure changes the contrast for the current job only. After the fax
has been sent or the copy is made, the contrast setting returns to the
default.
Note
To change the default contrast for outgoing faxes, see “Changing the
default contrast and resolution for outgoing faxes” on page 81.
To adjust the contrast
1
Press C ONTRAST to display the current contrast setting.
2
Use the < or > key to move the slider to the left to make the fax or
copy lighter than the original, or move the slider to the right to
make the fax or copy darker than the original.
3
Press E NTER /M ENU to save the selection.