HP LaserJet 3200 All-in-One Printer series - Manual (Page 80)

78
Chapter 4 - Faxing EN
Inserting a pause or wait into a fax number
You can insert pauses into a fax number you are dialing or
programming to a one-touch key, speed-dial code, or group-dial
code. Pauses are often needed when dialing internationally or
connecting to an outside line.
To insert a pause or wait
Press R EDIAL /P AUSE to enter a three-second pause in your dialing
sequence. A comma appears on the control panel display, indicating
that the pause will occur at that point in the dialing sequence.
Using dialing characters
When using the control panel to type your name in the header or type
a name for a one-touch key, speed-dial code, or group-dial code, you
press a numeric key repeatedly until the letter you need appears.
Then, you press
> to select that letter and move to the next space.
This table shows you which letters and numbers appear on each
numeric key when the default language is set to English:
Key number Contains these characters
1 1
2 A B C 2
3 D E F 3
4 G H I 4
5 J K L 5
6 M N O 6
7 P Q R S 7
8 T U V 8
9 W X Y Z 9
0 0
* ( ) + - . / , " *
# space #