HP LaserJet 3200 All-in-One Printer series - Manual (Page 96)

94
Chapter 4 - Faxing EN
Changing the silence-detect mode
This setting controls whether or not you can receive faxes from older-
model fax machines that do not emit a fax signal during fax
transmissions. At the time of this publication, these silent-model fax
machines represented very few of the fax machines in use.
The default setting is No. It should be changed only if you regularly
receive faxes from someone with an older-model fax machine.
To change the silence detect mode
1
Press E NTER /M ENU .
2
Use the < or > key to select FAX SETUP and then press E NTER /
M ENU .
3
Use the < or > key to select FAX RECEIVE SETUP and then press
E NTER /M ENU .
4
Use the < or > key to select SILENCE DETECTION and then press
E NTER /M ENU .
5
Use the < or > key to select ON or OFF and then press E NTER /
M ENU to save your selection.