HP LaserJet 3200 All-in-One Printer series - Manual (Page 40)

38
Chapter 3 - Managing General Default Settings, Logs, and Reports EN
Changing general default settings
This section contains instructions for:
l Changing the default paper size for the paper input tray
l Changing sound volume
l Changing the language on the display panel
l Restoring factory defaults
Changing the default paper size for the paper
input tray
The paper size should be set to the size of paper you normally load in
the paper input tray. The product uses this setting for copying,
printing reports, and determining autoreduction for incoming faxes.
Note
The printing function does not use this setting. If you are loading
special-size media for only your current print job, do not change this
setting. After you have finished printing, reload the original paper.
To change the default paper size
1
Press E NTER /M ENU .
2
Use the < or > key to select COMMON SETTINGS , and then press
E NTER /M ENU .
3
Use the < or > key to select DEFAULT PAPER SIZE , and then
press E NTER /M ENU .
4
Use the < or > key until the size of paper you have loaded
appears. You can choose LETTER , LEGAL , or A4 .
5
Press E NTER /M ENU to save your selection.