HP LaserJet 3200 All-in-One Printer series - Manual (Page 41)

EN Changing general default settings
39
Changing sound volume
You can control the volume of the following:
l The fax sounds associated with incoming and outgoing faxes.
l The ring for incoming faxes.
l The alarm sound the product emits when it requires attention,
such as when the printer door is open.
l The beeps emitted when you press control panel keys.
To change the fax sounds (line monitor) volume
Note
The default set at the factory is Soft.
1
Press V OLUME .
2
Use the < or > key to select OFF , SOFT , MEDIUM , or LOUD , and
then press E NTER /M ENU to save your selection.
To change ring volume
The ring volume is heard when the device is initially sending or
receiving a call. The ring duration length is based on the local telecom
ring pattern length.
Note
The default set at the factory for ring volume is Soft.
1
Press E NTER /M ENU .
2
Use the < or > key to select COMMON SETTINGS , and then press
E NTER /M ENU .
3
Use the < or > key to select VOLUME SETTINGS , and then press
E NTER /M ENU .
4
Press the > key once to select RING VOLUME , and then press
E NTER /M ENU .
5
Use the < or > key to select OFF , SOFT , MEDIUM , or LOUD , and
then press E NTER /M ENU to save your selection.