HP LaserJet 3200 All-in-One Printer series - Manual (Page 83)

EN Advanced send fax features and settings
81
Changing the default contrast and resolution
for outgoing faxes
The contrast affects the lightness and darkness of an outgoing fax as
it is being sent. Resolution affects the sharpness of outgoing faxes. It
also affects the transmission speed of faxes. See “Resolution
options” on page 62 for more information.
To change the default contrast
The default contrast is the contrast normally applied to items being
faxed. The slider is set to the middle as the default contrast setting.
Note
If you only want to change the contrast for the current job, see “Using
the Contrast button to adjust the contrast for the current fax or copy
job” on page 61.
Hint
You might want to test the contrast settings on some documents before
you set the default.
1
Press E NTER /M ENU .
2
Use the < or > key to select FAX SETUP and then press E NTER /
M ENU .
3
Use the < or > key to select FAX SEND SETUP and then press
E NTER /M ENU .
4
Use the < or > key to select DEFAULT CONTRAST
.
5
Use the < key to move the slider to the left to make the fax lighter
than the original, or use the > key to move the slider to the right to
make the fax darker than the original.
6
Press E NTER /M ENU to save your selection.