HP LaserJet 3200 All-in-One Printer series - Manual (Page 87)

EN Advanced send fax features and settings
85
Changing the detect dial tone setting
Normally the product waits for a dial tone before attempting to a dial a
fax number. If you are using the product on the same line as your
phone, turn on the detect dial tone setting. This will prevent the
product from sending a fax while someone is on the phone. In
Australia, this setting by default is set to Off.
To change detect dial tone
1
Press E NTER /M ENU .
2
Use the < or > key to select FAX SETUP and then press E NTER /
M ENU .
3
Press > once to select FAX SEND SETUP and then press E NTER /
M ENU .
4
Use the < or > key to select DETECT DIAL TONE and then press
E NTER /M ENU .
5
Use the < or > key to select ON or OFF and then press E NTER /
M ENU .