HP LaserJet 3200 All-in-One Printer series - Manual (Page 135)

EN Scanning from the product software
133
Scanning from the product software
This section discusses the scanning method in two phases:
1 Starting a scan
- this section shows how to use the HP LaserJet
Director to start a scan, to choose scan settings, and to choose to
scan all pages at once or scan page-by-page.
2 Working with scanned items
- if you choose to scan page-by-
page, this section explains the different ways you can edit a
scanned item.
Starting a scan
You can start the scanning process from the HP LaserJet Director.
Note
The HP LaserJet Director is not supported for Microsoft Windows 95.
If you are using Windows 95, see “Scanning with TWAIN-enabled
software” on page 142.
To scan using the HP LaserJet Director
Windows
1
Place the item into the document feeder tray.
If the product is connected directly to your computer and the HP
LaserJet Director opens after you insert an item into the
document feeder tray, proceed to step 3.
-Or-
If you are on a network or the HP LaserJet Director does not
automatically open, continue to step 2.
2
Open the HP LaserJet Director by clicking the HP LaserJet
Director icon located on the taskbar.