C controller fault management, Using hp p6000 command view, Gui termination event display – HP 6400.8400 Enterprise Virtual Array User Manual
Page 107: Gui event display
C Controller fault management
This appendix describes how the controller displays events and termination event information.
Termination event information is displayed on the LCD. HP P6000 Command View enables you
to view controller events. This appendix also discusses how to identify and correct problems.
Once you create a storage system, an error condition message has priority over other controller
displays.
HP P6000 Command View provides detailed descriptions of the storage system error conditions,
or faults. The Fault Management displays provide similar information on the LCD, but not in as
much detail. Whenever possible, see HP P6000 Command View for fault information.
Using HP P6000 Command View
HP P6000 Command View provides detailed information about each event affecting system
operation in either a Termination Event display or an Event display. These displays are similar, but
not identical.
GUI termination event display
A problem that generates the Termination Event display prevents the system from performing a
specific function or process. You can use the information in this display (see
) to diagnose and correct the problem.
NOTE:
The major differences between the Termination Event display and the Event display are:
• The Termination Event display includes a Code Flag field; it does not include the EIP Type field.
• The Event display includes an EIP type field; it does not include a Code Flag field.
• The Event display includes a Corrective Action Code field.
Figure 27 GUI termination event display
Description
Code Flag
Evt No
SWCID
Time
Date
The fields in the Termination Event display include:
•
Date—The date the event occurred.
•
Time—The time the event occurred.
•
SWCID—Software Identification Code. A hexadecimal number in the range 0–FF that identifies
the controller software component reporting the event.
•
Evt No—Event Number. A hexadecimal number in the range 0–FF that is the software
component identification number.
•
Code Flag—An internal code that includes a combination of other flags.
•
Description—The condition that generated the event. This field may contain information about
an individual field’s content and validity.
GUI event display
A problem that generates the Event display reduces the system capabilities. You can use the
information in this display (see
) to diagnose and correct problems.
NOTE:
The major differences between the Event Display and the Termination Event display are:
• The Event display includes an EIP type field; it does not include a Code Flag field.
• The Event display includes a Corrective Action Code (CAC) field.
• The Termination Event display includes a Code Flag field; it does not include the EIP Type field.
Using HP P6000 Command View 107