HP 6400.8400 Enterprise Virtual Array - Manual (Page 113)

Table 27 EVA8400 UPS loading
% of UPS capacity
Watts Enclosures
R12000 R5500
41.0 4920 12
36.8 98.1 4414 11
33.6 89.7 4037 10
30.5 81.3 3660 9
27.4 73.0 3284 8
24.2 64.6 2907 7
21.1 56.2 2530 6
17.9 47.9 2153 5
14.8 39.5 1777 4
11.7 31.1 1400 3
8.5 22.7 1023 2
5.4 14.4 647 1
Table 28 EVA6400 UPS loading
% of UPS capacity
Watts Enclosures
R12000 R5500 R3000
26.8 71.4 3214 8
23.6 63.0 2837 7
20.5 54.6 91.1 2460 6
17.3 46.2 77.2 2083 5
14.2 37.9 63.2 1707 4
11.1 29.5 49.3 1330 3
7.9 21.2 35.3 953 2
4.8 12.8 21.4 577 1
Shock and vibration specifications
Table 29 (page 113) lists the product operating shock and vibration specifications. This information
applies to products weighing 45 Kg (100 lbs) or less.
NOTE: HP EVA P6000 products are designed and tested to withstand the operational shock and
vibration limits specified in Table 29 (page 113) . Transmission of site vibrations through non-HP
racks exceeding these limits could cause operational failures of the system components.
Table 29 Operating Shock/Vibration
Shock test with half sine pulses of 10 G magnitude and 10 ms duration applied in all three axes (both positive and
negative directions).
Sine sweep vibration from 5 Hz to 500 Hz to 5 Hz at 0.1 G peak, with 0.020” displacement limitation below 10
Hz. Sweep rate of 1 octave/minute. Test performed in all three axes.
Environmental and operating specifications 113