Remove the output tray, Pack the device – HP Officejet J6480 All-in-One Printer User Manual
Page 186
Advertising
▲ Push the button on either side of the rear access panel or the duplexer, and then remove the
panel or unit.
Remove the output tray
Remove the output tray before shipping the device.
▲ Lift the output tray, and gently pull it out of the device.
Pack the device
Complete the following steps after you have prepared the device for shipment.
To pack the device
1. If available, pack the device for shipment by using the original packaging materials, or use
the packaging materials that came with your replacement device.
Appendix B
182
Support and warranty
Advertising