HP Officejet J6480 All-in-One Printer - Manual (Page 41)

When you change copy settings, the changes are for the current copy job only. You
must set the changes as defaults for the settings to apply to all future copy jobs.
To save the current settings as defaults for future jobs
1. Make any necessary changes to the settings in the Copy Menu.
2. Press Copy Menu, and then press the arrow keys until Set New Defaults appears.
3. Press the arrow keys to select Yes, and then press OK.
Set the number of copies
You can set the number of copies that you want to print by using the Number of
Copies option on the device control panel.
To set the number of copies from the device control panel
1. Make sure you have paper loaded in the input tray.
2. Place your original face down on the scanner glass.
3. In the Copy area, press Copy Menu repeatedly until Number of Copies appears.
4. Press or use the keypad to enter the number of copies, up to the maximum.
TIP: If you hold down either of the arrow buttons, the number of copies
changes by increments of 5 to make it easier to set a large number of copies.
5. Press START COPY Black or START COPY Color.
NOTE: Copy functions can also be performed using the HP Photosmart Software
(Windows) or HP Photosmart Studio Software (Mac OS). See the software's Help
for more information.
Set the copy paper size
You can set the paper size on the device. The paper size you select should match
what is loaded in your input tray.
To set the paper size from the device control panel
1. In the Copy area, press Copy Menu repeatedly until Copy Paper Size appears.
2. Press until the appropriate paper size appears.
3. Press START COPY Black or START COPY Color.
NOTE: Copy functions can also be performed using the HP Photosmart Software
(Windows) or HP Photosmart Studio Software (Mac OS). See the software's Help
for more information.
Set the copy paper type
You can set the paper type on the device.
Set the copy paper type 37