HP Officejet J6480 All-in-One Printer - Manual (Page 24)

automatic document feeder until you hear a beep or see a message on the display
indicating that the loaded pages were detected.
TIP: For more help on loading originals in the automatic document feeder,
refer to the diagram engraved in the document feeder tray.
2. Slide the width guides inward until they stop at the left and right edges of the media.
NOTE: Remove all originals from the document feeder tray before lifting the lid on
the device.
Select print media
The device is designed to work well with most types of office media. It is best to test a
variety of print media types before buying large quantities. Use HP media for optimum
print quality. Visit the HP Web site at
www.hp.com for more information about HP
media.
This section contains the following topics:
• Tips for selecting and using print media
• Understand specifications for supported media
• Set minimum margins
Tips for selecting and using print media
For the best results, observe the following guidelines.
•
Always use media that conforms to the device specifications. For more
information, see
Understand specifications for supported media .
• Load only one type of media at a time into a tray.
• Load media print-side down and aligned against the right and back edges of the
tray. For more information, see
Load media .
Chapter 2
20 Use the device