Operating instructions, Section i, Preparation for use – EOTech CNVD-T2 Clip-On Night Vision Device - Thermal 2 User Manual
Page 23: 1 preparation for use, Chapter 2 -1, Operating instructions -1, Section i -1, Preparation for use -1, 1 preparation for use -1
2-1
CHAPTER 2
OPERATING INSTRUCTIONS
SECTION I
PREPARATION FOR USE
2.1 PREPARATION FOR USE
Unpacking the Equipment
Open the soft carrying case and verify that all major
components listed in Table 1—2 are present. Check the
CNVD-T2 assembly to ensure the following additional items
are installed:
a. Battery Cap Assembly
b. Video Jack Plug
c. Objective Lens Cover (and straps)
If any of the major components or items listed above are
missing, seek guidance from the equipment issuing
authority.
Inspection of the Equipment
Before use, inspect all pieces of equipment for any damage
such as cracks, loose parts, faulty cables, or other visible
defects. If any damage or defects are noted, seek guidance
from the equipment issuing authority.