EOTech CNVD-T2 Clip-On Night Vision Device - Thermal 2 - Manual (Page 6)

iv
WARNING
• Do not short circuit, puncture, incinerate, or
disassemble batteries.
• Do not attempt to recharge batteries.
• Prior to use, inspect all batteries for cracks, dents,
leakage, or bulging. Never install a defective battery
in the CNVD-T2.
WARNING
Lithium batteries can explode or cause burns if
disassembled, shorted, recharged, or exposed to
water, fire, or high temperatures (above 100°C or
212°F). Do not place loose batteries in a pocket
or other container containing metal objects. Do
not store batteries with hazardous or combustible
materials. Store in a cool, dry, ventilated area.
WARNING
Use of off-brand batteries poses a risk of fire or
explosion. Ensure that only batteries produced by
a well-known battery manufacturer are installed in
the CNVD-T2. These batteries are specifically
designed for use in high performance, high-drain
devices, and contain built-in fault and heat
protection features.
WARNING
Use of incorrect batteries poses a risk of fire or
explosion. Be aware that batteries do exist with
similar physical characteristics to the DL123A
battery, but with a different voltage and/or polarity
path. Ensure that only 3V lithium batteries with a
raised positive (+) terminal are installed in the
CNVD-T2.