EOTech CNVD-T2 Clip-On Night Vision Device - Thermal 2 - Manual (Page 51)

2-29
2.26 RETRIEVING STORED IMAGES (Continued)
5. Press the Download Button. This downloads all images
stored in the CNVD-T2’s flash memory, converts them to
.tiff (or .jpeg) format, and saves them to the flash memory
of the Image Adapter Cable. The LED on the Image
Adapter Cable will flash green during this process.
NOTE
The Image Adapter Cable creates a separate
folder for each of the devices it has been
connected to. Initiating the download process
from the same device will cause the Image
Adapter Cable to overwrite the existing folder.
Renaming the old folder prior to downloading new
images will preserve the content of the original
folder.
6. Wait for the LED on the Image Adapter Cable to return to
a steady green state indicating that the transfer process is
complete. Open or refresh the Windows Explorer
dialogue box to view the contents of the Image Adapter
Cable’s flash memory. Images may then be viewed,
saved, edited, and/or deleted in the same manner as any
files accessed through an external hard drive.
Table 2-2. Image Adapter LED Indicators.
LED Indicator Status Condition
Green (steady) Powered and passed self test
Green flashing Data transfer in progress
Red (steady) Powered but failed self test
Red flashing Operational error