EOTech CNVD-T2 Clip-On Night Vision Device - Thermal 2 - Manual (Page 39)

2-17
2.17 RETICLE INTENSITY (RETINT)
Activating the RETINT menu item allows the operator to
adjust the color of the boresight reticle from white, through
the gray scale to black, to provide the best contrast with the
viewed image.
Once activated, the reticle intensity scale is presented in the
eyepiece display as shown in Figure 2-8.
+
-
Figure 2-8. Reticle Intensity Control.
Reticle intensity is adjusted by pressing the UP / DOWN
buttons to move the status bar along the + / - scale.
Repeatedly pressing the UP / DOWN buttons will move the
status bar in single increments. Pressing and holding the
UP / DOWN buttons will auto-scroll the status bar in multiple
increments.
If the UP / DOWN buttons are not pressed within 3 seconds,
the reticle intensity scale will disappear and the CNVD-T2
will revert to normal viewing mode.
STATUS BAR