EOTech CNVD-T2 Clip-On Night Vision Device - Thermal 2 - Manual (Page 41)

2-19
2.18 RETICLE (RET) (Continued)
Figure 2-10. Reticle Position Adjustment.
OFF Sub-Menu Item
Activating the OFF sub-menu item turns the boresight reticle
off. Turning the reticle back on is accomplished by selecting
the RET menu item from the Main Menu.
2.19 PICTURE (PIC)
Activating the PIC menu item takes a digital picture of the
viewed image. The image is automatically stored to non-
removable flash memory with a maximum capacity of
approximately 150 pictures.
When attempting to take more than the maximum allowable
number of pictures, the words “CAMERA FULL” will appear
in the eyepiece display. No more pictures may be taken until
one or more of the stored pictures are deleted (see
section 2.20.).
Images stored in the CNVD-T2 may be downloaded to the
Image Adapter Cable for further transfer to a personal
computer (see Section V).
POS ADJ
AZ 8 L
EL 2 U