EOTech CNVD-T2 Clip-On Night Vision Device - Thermal 2 - Manual (Page 43)

2-21
2.21 RS170 / VGA
Activating the RS170 / VGA menu item toggles between
these two display formats. VGA format is appropriate for
high-motion viewing. RS170 format is appropriate for all
other applications. See Section V for instructions on how to
connect the CNVD-T2 to an external monitor for viewing live
thermal imagery.
NOTE
When viewing the CNVD-T2 thermal image on an
external monitor, the RS170 video format must be
selected. Using the VGA video format for this
purpose will result in an extremely distorted image.
2.22 EXIT
Exiting the Main Menu is accomplished by either activating
the EXIT menu item or pressing the LEFT or RIGHT button.
Exiting the Main Menu saves all changes made and returns
the CNVD-T2 to normal viewing mode.
NOTE
The message “NO SAVE” will appear at the
bottom of the display if settings could not be saved
due to low battery power. Changes will be made,
but not saved for future use.