EOTech CNVD-T2 Clip-On Night Vision Device - Thermal 2 - Manual (Page 50)

2-28
2.26 RETRIEVING STORED IMAGES
Images stored in the CNVD-T2 may be downloaded to the
Image Adapter Cable and converted to either a .tiff or .jpeg
file format (depending on model). Once downloaded,
images may then be viewed, saved, edited, and/or deleted
by a PC in the same manner as any files accessed through
an external drive. The Image Adapter Cable can store in
excess of 400 .tiff files. Storage capacity for .jpeg files is
considerably higher.
NOTE
The download process does not remove any of the
raw images from the CNVD-T2’s flash memory.
Deleting saved pictures from the CNVD-T2 must
be accomplished as described in section 2.20.
1. Remove the video jack plug (captive to the CNVD-T2)
from the video jack.
2. Plug the Image Adapter Cable into the CNVD-T2 by
aligning the white dot on the cable plug with the white dot
on the video jack. Push the cable plug into the video jack
until it locks into place.
3. Insert the Image Adapter Cable’s USB connector into a
free USB port on the computer. The PC will recognize
the Image Adapter Cable as an external hard drive and
will normally open a Windows Explorer dialogue box to
display the contents of the drive.
4. Wait for the LED on the Image Adapter Cable to turn solid
green. Other LED status indicators are described in
Table 2-2.