Anritsu S251C - Manual (Page 28)

RF Source Menu
RF Source mode provides an RF Out source that can be used, for example, in the alignment
of dish antennas. Selecting
RF SOURCE from the Mode menu causes the soft keys, de-
scribed below, to be displayed:
q FREQ — Allows setting of the RF source frequency. Use the keypad number
keys to enter a frequency, or use the Up/down arrow key to adjust the fre-
quency in 10 kHz steps. Press
ENTER to accept, or ESCAPE to restore the
previous value.
q POWER — Selects the RF source output power level. Choose either +6.0
dBm or –30.0 dBm.
Chapter 2 Functions and Operations
2 - 11
MODE=RF SOURCE:
SOFTKEYS:
FREQ
POWER
Figure . RF Source Softkeys