Mounting the transmitter housing, Figure 3, Measurement error at 100 %rh – Vaisala HMT360N User Manual
Page 23
Advertising
Chapter 3 _______________________________________________________________ Installation
VAISALA _______________________________________________________________________ 21
0507-036
Figure 3
Measurement Error at 100 %RH
Mounting the Transmitter Housing
1.
Attach the mounting plate to the wall with 4 screws.
2.
Press down the transmitter so that it slides along the rails of the
mounting plate.
3.
Fasten the transmitter to the mounting plate with the Allen screw
(3 mm Allen key provided).
The probe can be detached and replaced when needed by simply
unfastening the two Allen screws.
Advertising