Probe mounting, Hmp362 small pressure-tight probe, Figure 6 – Vaisala HMT360N User Manual
Page 26: Hmp362 probe and hmp302sc sampling cell dimensions, Probe mounting hmp362 small pressure-tight probe
Advertising
User's Guide ______________________________________________________________________
24 __________________________________________________________________ M210744EN-C
Probe Mounting
HMP362 Small Pressure-Tight
Probe
The HMP362 probe is a small pressure-tight probe equipped with an
installation flange. It is suitable for dewpoint measurements in natural
gas. When sampling in pressurized processes, the sampling cell
HMP302SC is available as an optional accessory.
0603-014
Figure 6
HMP362 Probe and HMP302SC Sampling Cell
Dimensions
CAUTION
Do not unsolder and then resolder the probe cable from and to the
printed board during installation.
Do not shorten or lengthen the probe cable.
These procedures may alter the humidity calibration of the transmitter.
Advertising