Vaisala HMT360N - Manual (Page 61)

Chapter 4 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 59
FILT Output Filtering
Syntax: FILT a.aaa<cr>
This commands sets the measurement result filtering.
Example:
>filt 1<cr>
Filter : 1.0000
>filt 0.5<cr>
Filter : 0.5000
>filt 0.1<cr>
Filter : 0.1000
>
Resetting the Transmitter
RESET Transmitter Reset
Syntax: RESET<cr>
This command resets the device.
where
a.aaa = 0.1 ... 1
1 = No filtering
0.5 = Average of last two measurements
0.1 = Average of ca. 16 measurements