Chapter 8 troubleshooting, Diagnostics, Operation errors – Vaisala HMT360N User Manual
Page 75: Chapter 8, Troubleshooting, Diagnostics operation errors
Advertising
Chapter 8 ___________________________________________________________ Troubleshooting
VAISALA _______________________________________________________________________ 73
CHAPTER 8
TROUBLESHOOTING
This chapter describes common problems, their probable causes and
remedies, and contact information.
Diagnostics
Operation Errors
The following symptoms indicate an operation error of the HMT360:
-
The analog output(s) current drops below 4 mA.
-
Display shows the word "ERROR".
In the case of error:
-
Check that the sensor is connected properly. Clean the sensor
according to instructions in section
.
-
Check if there is condensed water in the probe. If yes, let the probe
dry.
In case of constant error, contact the Vaisala Helpdesk. See section
Advertising