Electrix Repeater - Manual (Page 10)

Power Input - accepts only the Repeater power supply. Pull back the
connector housing to insert the jack into Repeater.
Footswitch - plug in a Digitech FS-300 three button footswitch here.
Undo, Play/Stop, and Record are supported with the footswitch. A sin-
gle momentary footswitch will control the Record function. Please con-
nect the footswitch before powering up Repeater.
MIDI Thru - sends a perfect copy of the MIDI information received at
the MIDI in.
MIDI Out - transmits the best of the front panel commands to facilitate
the use of multiple Repeaters in loop based recording setups and live
rigs.
MIDI In - full support for MIDI control change, program change and
MIDI clock messages to control all front panel functions.
MIDI Channel Select - selects the receiving/transmitting MIDI channel.
Digital Output - 44.1kHz, 16 bit S/PDIF Coaxial 75 Ω main output for
those who know better than to use the analog inputs on their Sound
Blasters.
Main Outputs - stereo mix outputs.
FX Send - a post fader, post pan FX send activated by the front panel
control. Connect this to the input of an Electrix MOFX or Filter Factory
for some serious FX mayhem. The FX send also serves as multiple out-
puts. Just assign Tracks 3 & 4 to the FX sends and pan them hard left
and right. Tracks 1 & 2 will be on the main outputs while 3 & 4 come
out the FX sends. See ADDING EXTERNAL FX for details.
FX Return - Connect the outputs of your FX device here. The FX return
is mixed in with the other tracks on the main bus that is sent to the
main and digital outputs. See page 12 for details.
Main Inputs - Stereo unbalanced 1/4" inputs. (Don't forget the mono
instrument input of the front as wellÉ)
RCA & Phono Pre inputs - the RCA's and the phono pre afford quick
and easy setup with CD players and turntables.
English... 10
REAR PANEL
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
8
9
9
9
1 0
1 0
1 0
1 1 1 1
1 1
1 2
1 2
1 2