Electrix Repeater - Manual (Page 41)

C o p y
If there is not enough memory
to complete the copy the "
" message is presented. If
there is room to copy the display will indicate the current source loop on the left
and destination loop on the right. The Tempo knob controls the destination.
Stop and Record will flash. Pressing Copy performs the action. Pressing Stop
(or any other button) cancels the copy. The copy function is complete and the
unit leaves copy mode.
Overdub Fe e d b a c k L e v e l
A single press of Overdub puts the unit in overdub mode. Press and
hold Overdub for 3 seconds and the unit enters feedback edit mode.
Modify the feedback level using the Tempo knob.
Edit Beat
Press and hold the Sync button for one second and the unit
enters tempo edit mode. Use the Loop knob to edit the total
number of beats in the loop. Use the Tempo knob to change the
time signature.
S l i p
If only one track is selected for slipping the display reads " " with a
higher resolution displayed for the slip amount in bars/beats/1/100 of a
beat. If more than one track is selected for slipping the display shows all
slip values (in beats only). The dot indicates that the value is as displayed
plus some fraction.
Pa n
If only one track is selected for panning the display says " " with a
higher resolution displayed for the pan amount in %. If more than one
track is selected for panning the display shows all pan values.
P i t c h
If only one track is selected for pitch shifting the display says " " with
a higher resolution displayed for the pitch amount in semitones up (no extra
indicator) and down (a minus sign). If more than one track is selected for
pitch shifting the display shows all shift values.
English... 41
REFERENCE