Electrix Repeater - Manual (Page 7)

KEY FEATURES OF REPEAT E R
Time Stretching gives Repeater the unique ability to change tempo without affecting the pitch of the loop.
Pitch Shifting lets you change the pitch or key of each track independently. Repeater uses instrumental pitch
shifting that is specially engineered for music.
Loop Point Assistª (LPA) is an automatic loop trimming feature. It automates the tedious "pre-production"
process of manually trimming a loop to match a given BPM. LPA works in real time. The moment Repeater
leaves record, it will begin playing the automatically trimmed loop. You can over-ride LPA with the loop trim
function. Learn more about this in LOOP EDITING.
Compact Flash Cards (CFC) are Repeater's main storage mechanism. They supplement Repeater's internal 8MB of
memory with up to 512MB of additional storage space. Loops on the CFC are in .WAV file format. With the
addition of an inexpensive CFC USB card reader, you can export loops and tracks from Repeater to your PC with-
out any special software.
MIDI Clock makes syncing Repeater up to your sequencer or drum machine easy. When you adjust your tempo,
Repeater will time stretch the loop to match the tempo without affecting the key. How cool is that?
Beat Detection keeps Repeater in sync with incoming audio like a live drummer or a vinyl source. (Okay, this one
may be even cooler that the MIDI sync above.)
The FX Insert allows external effects to be applied to individual tracks, the input of Repeater, or the entire output.
Alternatively you can use the FX insert to achieve independent track outputs.
Reverse Play is a fun way to realize reverse solos and ambient textures.
These are just a taste of some of the great features in Repeater. So call your friends and tell them how smart you are
for buying Repeater, then sit down and learn how to use it. Trust us, it's quite easyÉ
ALL THINGS RELATED TO POWER
Repeater comes with an external switching power supply. It will work with line voltages from just about anywhere
around the world without any modification. If you should happen to lose your Power Supply, get in touch with
Electrix and ask for a TFR0035. The Electrix TFR0035 is the only Power Supply that will work with Repeater.
RepeaterÕs power supply features a locking connector.
To insert the connector:
¥ Pull back the housing
¥ Insert the connector
¥ Release the housing
SLEEP MODE
Repeater does not have a power switch. It does, however, have an
energy saving sleep mode. To enter sleep mode:
¥ Press Reverse and Stop at the same time and hold for 3
seconds
¥ You will not lose any of the data stored in internal or external
memory.
TO WAKE REPEATER PRESS ANY BUTT O N
English... 7
OVERVIEW
Sleep Mode
Pull back the housing to insert