Electrix Repeater - Manual (Page 28)

English... 28
S L I PP I N G
Slipping lets you offset the start position of a loop
or its individual tracks.
¥ Press Slip, and the display will change to show
the slip offset of each active track in beats.
¥You can select/deselect the appropriate tracks
for Slipping by using the Track Select but-
tons. Editing one track at a time displays the slip
amount with a finer resolution.
¥ Use the Tempo knob to set the slip position in
bars/beats/1/100 of a beat, with zero being the
original position. Use the Loop knob to slip
whole beats
¥Twist the knob quickly to edit in larger steps.
Twist the knob slowly to adjust in finer amounts.
¥ Press Slip again to confirm and exit.
¥ Press and hold Slip to reset to 0 slip.
P I T C H S H I FT I N G
You can alter the pitch of your tracks by
one octave up or two octaves down.
¥ Press the Pitch button and the
display will change to show pitch
information in semi-tones for the
selected track(s).
¥ Deselect any tracks you donÕt want
to Pitch Shift using the Track Select buttons. Editing one track at a
time displays the pitch shift amount with a finer resolution.
¥ Use the Tempo knob to change the pitch in cents (100th of semitone)
intervals. Use the Loop knob to shift in semitone increments
¥You can press and hold Pitch to reset to 0.
PA NN I N G
You can set the pan positions for tracks using the Pan button.
¥ Press Pan, and the display will change to show the current pan value.
¥ Deselect any tracks you donÕt want to Pan using the Track Select
buttons. Editing one track at a time displays the Pan amount at a finer
resolution.
¥ Use the Tempo knob to scroll the pan values from 100% Left to 100% Right. Press and hold Pan to reset the
values back to 0.
English... 28
LOOP EDITING
Using a Keyboard to Trigger
Pitch
RepeaterÕs Track Pitch Shift can be eas-
ily controlled with MIDI note informa-
tion. All the tracks currently selected
for slip/pan or pitch will be affected.
To control the track Pitch Shift via
MIDI:
¥Connect the MIDI out of your key-
board to the MIDI In on Repeater
¥ Set the MIDI receive channel on the
back of Repeater to match the MIDI
transmit channel on your keyboard
¥ Play monophonically (one note at a
time) to shift the pitch
¥ Middle C will return the track(s)
back to their default key
Track 1
Track 2