Electrix Repeater - Manual (Page 21)

You may adjust the mix or any other parameter during the resampling operation.
During resample, if any destination tracks have the FX insert assigned to them then any tracks that were not chosen
as sources will have their FX sends suspended. The FX send lights will flash until the resample is done. This ensures
the FX return from such tracks does not mix into the resampled track or tracks.
R E V E R S I N G
Reversing is great for creating (or decoding) secret messages or transmogrifying your lyrics into some ancient foreign
tongue. More appropriately, Reverse Play is a fun way to create reverse solos and ambient textures. You can put
Repeater into Reverse only when Repeater is in PLAY or STOP mode. Repeater will not allow you to reverse
direction in the middle of a recording.
A cool effect is to hit Reverse, overdub a new part, and then hit Reverse
again to take you out of the reverse mode. Now your loop will play forwards, and
the portion you've just overdubbed (like a guitar solo) will be playing backwards.
!looC
FX INSERT
The stereo effects insert allows you to integrate external effects processing into
your loop/sound design. You can assign this insert to the main input or on individ-
ual tracks. The insert is engaged when the FX Insert button is lit. If there is nothing plugged into the FX Inserts
when the insert is engaged, the signal path will be broken and you will no
longer hear what is routed to the FX Inserts. Assigning the FX Insert to the
input allows you to record the effects into the loop.
To select tracks for the FX Insert:
¥ Press and hold FX Insert button, the display will read " ".
¥ Use the Track Select buttons to select the tracks to be sent to the FX Insert.
¥ Release the FX Insert Button.
English... 21
RECORDING LOOPS
Engaging the FX Send