Electrix Repeater - Manual (Page 42)

FX Insert E n g a g e
When the FX Insert is lit the FX Insert is engaged. While it is held down the
display says "
" and the tracks to be sent can be selected by the
Track Select buttons (which are lit to indicate the selected tracks to be
sent out the insert). These tracks are always
displayed by lit FX Insert LEDs. (Even when the
insert is not engaged).
R e s a m p l e
Set the Levels, Pan, Pitch and FX Inserts just how you want
it to sound for the new resampled track. Use the Track Select
buttons to select the track(s) you wish to record to. Press
Resample. The display will show "
". Use the Track
Select buttons to select the tracks you wish to be a part of the
new mixed track(s). Press Resample. Now press Record to
engage the resample. Press Record again to finish the resample.
CFC States
- Card Ready: Card inserted in socket and socket LEDs off
- Reading from card: Green.
- Writing to card: Red.
- Reading/Writing: Amber.
- Card rejected: Flashing Red
Note: Removing the card whilst reading or writing is in progress can potentially corrupt the file system on the
card. To be safe, ensure the CFC slot LEDs are off before removing the card.
Unformatted Cards
If you insert an unformatted card in while playing a loop the CFC light blinks red.
If you insert an unformatted card any other time the " " display comes
up. To format the card the unit needs to be stopped. When the " "
prompt comes up just press record to format the CFC. To force format simple insert
the CFC while holding the Stop button.
Remember to check the amount of remaining memory by holding down the Copy
button. First press shows the internal memory left, a second press of Copy shows
the CFCÕs available memory. A third press exits.
English... 42
REFERENCE