Electrix Repeater - Manual (Page 25)

From Record
This will immediately stop the recording process and return the current playback/read point to the start of the
loop.
R E V E R S E
Reverse can be pressed at any time except during recording. For both recording and playback, the active direction
will now be reverse. If pressed again the transport will return to the forward operating mode.
In Beat Detect and MIDI Sync modes going in and out of reverse might cause your loop to speed up. This is because
external sync modes, like Beat Detection and MIDI Sync, force the loop to synchronize to the incoming beats. HereÕs
what happens: as Repeater goes in and out of Reverse the beat of the loop may become misaligned to that of the
external sync source, so Repeater will speed up/slow down to correct this timing discrepancy and realign the beats. If
you don't want this to happen put Repeater into User mode. In User mode, RepeaterÕs ÒintelligenceÓ takes a back
seat, allowing you to Reverse all you want without it trying to stay in sync with anything.
English... 25
THE TRANSPORT