A&D Ej Series Compact Balance EJ-2000 - Manual (Page 22)

20
8-5. Function list
Class Item
Param-
eter
Description
Š 0 Auto power-off disabled poff
Auto power-off 1 Auto power-off enabled
Automatically
power off
0 Fast / sensitive
1
Š 2
3
Cond
Response
4 Slow / stable
Software filtering
0 Stable when within ± 0.5d/0.5s
Š 1 Stable when within ± 1d/0.5s
st-b
Stability band
width
2 Stable when within ± 2d/0.5s
Conditions to
turn on the
STABLE indicator
0 Disabled trc
Zero tracking Š 1 Enabled
Tracking zero shift
Š 0 Point (.) pnt
Decimal point 1 Comma (,)
Decimal separator
Š 0 Comparator disabled
1 Compares all data
2 Compares all stable data
3 Compares plus data > +4d
4 Compare stable plus data > +4d
5 Compares data > +4d or < -4d
Cp
Comparator mode
6 Compares stable data > +4d or < -4d
Conditions to
compare.
d = the minimum
display division
0 Command and stream modes
Š 1 Command and PRINT key
2 Command, PRINT key and auto-print A
3 Command, PRINT key and auto-print B
prt
Data output
mode
4 Command mode only
Auto-print A:
+ data
Auto-print B:
+/- data
Š 0 No pause (general equipment) pUse
Data output pause 1 1.6 seconds (for AD-8121)
Interval between
continuous data
Š 0 No output
1 AD-8121 format ( * )
info
GLP output
2 General format
GLP
output format
Š 0 2400 bps
1 4800 bps
2 9600 bps
bps
Baud rate
3 1200 bps
Š 0 7 bits, even parity
1 7 bits, odd parity
func
btpr
Data and parity
2 8 bits, non parity
Š Factory setting
( * ) When the AD-8121 format is selected, the interval between data is 1.6 seconds
regardless of the setting “pUse”.